The TS-48 sorters  is a high speed modular sorter line, which you can configure to your demand. The Intelligent modular sorting application is intended for use in logistic systems, mainly in the post & parcel industry. The application consists of at least one main cabinet with the Master CPU and HMI (both SigmaControl) to power on and control one or more slaves by a Varaan bus-system. Each slave can control up to 6 servo-based sorting-rows containing 2 till 5 rotating wheels all driven by 1 servobased transport-motor. This leads to adjustable reliable speeds and exact sensor-controlled time-based separation of boxes and envelopes. Optional Sensors on the outputs can give a “full” signal or a fault when a box was expected. The Master can communicate with a WMS based on several networks as (optional) Profinet, Ethercat to enter the box-data, such as weight, dimensions and output positions.


Key facts and benefits



Mechanical information;

Wheel diameter ø 180mm
Row length 200mm
Standard width 400-600-800-1000mm
PU wheel diameter ø 58mm
PU shore 70 ° shore
Diverting angle -90 ° till +90 °


Product handling W x L
Min. size product 150 x 150mm
Max. size product 900 x 1500mm, bigger on request​
Min. product height 10 mm
Sorting capacity max 10000 pph ( depending on size and weight )
Min. product weight 50 gr.
Max. product weight 50 Kg.
Products Boxes, crates etc.


Control information;

Motor rotation servo drive 48V
Max rotation speed -90 ° till +90 ° in 0,25 seconds​
Motor PU wheels servo drive 48V
Max. speed 2,5 m/s
Sensors 1 home sensor per row
Control Sigmatek​


BM-400V Belt module

The BM-400V belt module is a belt conveyor driven by a 400V gear motor whith a frequenz adjuster as control.
The drive section is a center drive section, in the center drive are tentioner rollers which you can adjust from the outside of the frame to tension the belt and control the direction of the belt.
The module is build up in the same aluminium black anodised frame profile as the sorting unit.
The belt material is a PU friction top belt, 2 layer color black, which slides over a galvanised top plate.


Mechanical information;

Idler diameter ø 60mm​
Drive roller ø 60mm
Transmission By tooth belt and tooth wheel
Conveyor  length 1000 / 1500 mm & 3000mm, others on request​
Standard width 400-600-800-1000mm.
Belt material​ PU 2 layer, friction top
Maximum speed 3 m/s


Control information;

Max. speed 2,5 m/s
Sensors sensors not included
Control 1 Frequenz adjuster
Copyright © 2021 Flowsort B.V. | Privacy Statement
Copyright © 2021 Flowsort B.V.
Privacy Statement
Webdesign & CMS by Downdijk